Rear Suspension
Fastener Tightening Specifications
• 1 Always replace
• 2 Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] Procedures, (except for vehicle alignment)
• 3 Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] Procedures
• 4 Tighten evenly on both sides
• 5 Rest the vehicle on its wheels (standard level) before tightening
• 6 Always replace the nut
• 7 Tighten the bolt an additional 180 degrees when the vehicle is resting on its wheels