Tire Pressure Monitoring System, General Information

Tire Pressure Monitoring System

Observe the notes about usage in your => Owner's manual.

Damaged wheel electronics or valves should be replaced for safety reasons.

Do not clean wheel electronics with steam or strong compressed air.

Replace wheel electronics after using tire sealant as the accumulation of sealant on the pressure sensor can cause false readings.

The tire pressure monitoring system monitors the pressure of the four tires and the spare tire while driving.

A fault may be saved in the DTC memory if:

Transporting wheels with wheel electronics

Less than three wheels with wheel electronics are installed.

• When a wheel with wheel electronics is changed (summer/winter tires), the control module automatically adapts the wheel electronics.