RNS-E Navigation System Telephone Transceiver, Fixed Installation
RNS-E Navigation System Telephone Transceiver, Fixed Installation
- Turn off all electrical components.
- Remove ignition key.
Removing
- Remove right A-pillar trim.
- Remove right front seat.
• Safety belt on seat frame must not be loosened.
- Fold back the floor mat.
- Release electronics box cover - arrows - and remove it.
- Disconnect connectors - 2 - on Telephone/Telematics Control Module (J526) - 1 -.
- Remove Telephone/Telematics Control Module (J526 ) - 1 - from electronics box.
Installing
- Install in reverse order.
- Perform adaptations and coding on Telephone/Telematics Control Module (J526) if necessary.