Function 10 - Adaptation
General Information
The new seat adjustment with memory generation features On Board Diagnostic (OBD) capability. The control module for seat adjustment with memory is equipped with a DTC Memory.
Malfunctions occurring in monitored components/wiring are stored in DTC memory together with an indication of the type of malfunction.
If any control elements are replaced they must be adapted and a basic setting must be initiated => [ Seat Control Element, Basic Setting ].
On Board Diagnostic (OBD), initiating program
Test requirements:
• Voltage supply and fuses for appropriate systems OK.
• Connecting scan tool (VAS5051) => [ VAS 5051, Connecting ] VAS 5051, Connecting
• Switch ignition on.
• If no display appears, use wiring diagram to check power supply for (VAS5051)
• Additional operating instructions can be called up by pressing the Scan Tool HELP button.
• The next step in the program sequence can be selected by pressing the -> button.
• Incorrect entries can be terminated by pressing the C button..
- Switch on printer by pressing Print button (indicator lamp in button lights up).
- Press button 1 for "Rapid data transfer".
Indicated on display:
Rapid data transfer HELP
Enter address word XX
Function 10 - Adaptation
Requirements:
• Connect Scan Tool (VAS5051) (ST) => [ VAS 5051, Connecting ] VAS 5051, Connecting.
• Switch on ignition.
Implementing Function, 10 - Adaptation
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons 1 and 0 to select " Adaptation".
Indicated on display:
Rapid data transfer Q
10 - Adaptation
- Confirm entry with Q button.
Indicated on display:
Adaptation
Feed in channel No. XX
- Press buttons 8 and 1 to select " Channel" 81.
• Incorrect entries can be corrected after pressing the C key.
- Confirm entry with Q button.
Indicated on display:
Channel 81 Adaptation 1 ->
< PIN ? -1 3->
- Enter 20771 and press the -> button.
Indicated on display:
Channel 81 Adaptation 20771 ->
- Press the -> button.
Indicated on display:
Channel 81 Adaptation 20771 Q
Store changed value?
- Confirm input with Q button.
Indicated on display:
Channel 81 Adaptation 20771 ->
Changed value is stored.
- Press the -> button.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons 0 and 6 to select " End output".
If the Adaptation value (PIN) is incorrectly entered three times, the Adaptation function will be disabled.
Indicated on display:
Channel 81 Adaptation 00000 Q
Disabled 10
The current disabled time in minutes (e.g. 10) is indicated in field 2, on the bottom line.
- Press the Q button.
- Initiate Adaptation again after the indicated disabled time has elapsed.
If Adaptation is performed and no new vehicle data is available, the following appears:
Indicated on display:
Channel 81 Adaptation 00000 ->
Bus not OK
- Press the -> button.
In this case, Adaptation is not necessary.