Convertible Top Operation Electrical Components - Assembly Overview

Convertible top operation electrical components-assembly overview

NOTE:
- When working on the convertible top electrical system, disconnect vehicle battery ground strap.
- All cable ties that are loosened or cut off when removing convertible top should be reinstalled in the same places during installation.







1 - Convertible top latch
- Consists of:
- Convertible Top Locking Motor V223
- Convertible Top Lock Switch (open) F294
- Convertible Top Lock Switch (closed) F295
- Tightening torque
2 - Convertible Top Control Module J256
- Tightening torque
3 - Convertible top position switch
- Consists of:
- Convertible Top Open Position Switch F171
- Convertible Top Closed Position Switch F202
4 - Convertible Top Frame Position Sensor G356
- Tightening torque.
5 - Compartment Cover Open Position Switch F201
- Tightening torque.
6 - Convertible top operation hydraulic unit
- Consists of:
- Convertible Top Hydraulic Pump V118
- Convertible Top Hydraulic Pump Relay J321
- Convertible Top Hydraulic Pump Relay 2 J588
- Power Convertible Top Valve 1 N272
- Power Convertible Top Valve 2 N341
- Power Convertible Top Valve 3 N342
7 - Convertible Top Compartment Enclosure Position Switch F292
- Removing.
8 - Compartment Cover Locked Right Switch 1 F200
9 - Convertible top compartment cover lock
- Consists of:
- Convertible Top Compartment Latch Switch (unlock) F293
- Convertible Top Compartment Cover Locking Motor V222
10 - Left Convertible Top Compartment Cover Switch F290
11 - Convertible Top Front Lock Switch F172
- Tightening torque
12 - Convertible Top Operation Switch E137







Convertible Top Front Lock Switch F172
2 - 10 Nm







Convertible Top Control Module J256
Arrow - 2.5 Nm







Convertible Top Frame Position Sensor G356
B - 1.5 Nm







Compartment Cover Open Position Switch F201
1 - 1.5 Nm