Lumbar Support Adjustment Motors, Assembly Overview

Lumbar Support Adjustment Motors, Assembly Overview

NOTE: On the drivers seat in the illustration, the lumbar support height adjustment motor is on the left and the lumbar support adjustment motor is on the right.







1 - Lumbar support adjustment motors (2x)
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Remove backrest cover panel.
- Disconnect connector.
- Remove bolts.
- Disengage Bowden cable at 4-way lumbar support.
- Replace motor.
2 - Seat height adjustment motor
3 - Seat inclination adjustment motor
4 - Forward and backward seat adjustment motor
5 - Backrest adjustment motor