Seat Cover and Cushion, Standard Seat

Seat Cover and Cushion, Standard Seat





1 Cover

• Removal:

- Remove seat: vehicles from November 2004 => [ Standard Front Seat ] Standard Front Seat, From November 2004.

- Remove backrest: vehicles from November 2004 => [ Backrest, Standard Front Seat ] Standard Front Seat, From November 2004.

- Unclip connector for heated seat - 2 - from bracket.

- Pry out plastic strips - 3 - all around using a screwdriver.

- Install cover - 1 -.

- Pry out grip channels - 4 - from plastic clips - 5 - using a screwdriver.

- Remove cover - 1 - upward.

- Remove upholstery - 6 -.

• Installing:

To install, perform the steps used in removal in reverse order. Observe the following when doing so:

- Damaged plastic clamps - 5 - must be replaced.

- for vehicles with LATCH bracket and new cover - 1 -, cover must be cut in at LATCH bracket, refer to => [ LATCH Bracket Cover ] Latch Bracket Cover.

2 Seat Heating Connector

3 Circular Plastic Strips

4 Fastening Strips

5 Plastic Clips

• Replace damaged plastic clips

6 Upholstery

7 Seat Heating

8 Seat Pan