Bowden Cable of Seat Height Adjuster Unit, Removing and Installing

Bowden Cable Of Seat Height Adjuster Unit, Removing And Installing







1 - Bowden cable of seat height adjuster unit
- Removing
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Remove side trim on sill panel side.
- Remove side trim on tunnel side.
- Remove backrest.
- Remove Bowden cable - 1 - from holder - 2 -.
- Remove tab - 4 - from pin - 3 -.
- Remove Bowden cable - 1 - from holder - 5 -.
- Remove Bowden cable at hook - 7 - from holder - 6 -.
- Installing
- Install Bowden cable of seat height adjuster unit - 1 - in reverse order of removal.
2 - Holder
3 - Pin
4 - Tab
5 - Holder
6 - Holder
7 - Hook