Backrest Wiring Harness
Backrest Wiring Harness
1 - Connector (Qty. 3)
2 - Wiring harness
• Removing
- Remove seat. Refer to => [ Seat ] Seat.
- Remove side trim on sill side. Refer to => [ Side Trim, Sill Side ] Side Trim, Sill Side.
- Remove side trim on tunnel side. Refer to => [ Side Trim, Tunnel Side ] Side Trim, Tunnel Side.
- Remove the backrest. Refer to => [ Front Backrest ] Front Backrest.
- Remove backrest cover panel. Refer to => [ Backrest Cover ] Backrest Cover.
- Remove cover and padding from backrest. Refer to => [ Backrest Cover and Cushion, Sport and Standard Seats ] Front Seat Covers and Cushion, Power Memory Seats.
- Remove cable ties - 3 - (Qty. 3).
- Remove connectors - 1 - (Qty. 3).
- Remove wiring harness - 2 -.
• Installing
- To install, perform the steps used in removal in reverse order.
3 - Cable Ties (Qty. 3)