Side Trim, Sill Side

Side Trim, Sill Side

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)





• Fixture for seat repair (VAS 6136)









1 Catch

2 Side Trim (Sill Side)

• Removing

- Remove seat. Refer to => [ Standard Front Seat ] Standard Front Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove backrest adjustment wheel. Refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel.

- Remove seat height adjustment handle. Refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle.

- Loosen footwell cover retaining strip from side panel. Refer to => [ Footwell Cover Retaining Strip, Loosening ].

- Position a screwdriver to head of plastic rivet - 5 - (Qty. 2).

- Pry out plastic rivet - 5 - (Qty. 2) by turning the screwdriver.

- Remove screw - 4 -.

- Disengage front side panel from locking mechanism - 1 -.

- Pull side panel toward front in order to disengage eyelet - 3 -.

- Disengage side panel toward top.

- Remove connector - 6 -.

• Installing

To install, perform the steps used in removal in reverse order. When doing so, note the following:

- Slide footwell cover retaining strip into side panel brackets - 2 -. Refer to => [ Footwell Cover Retaining Strip, Loosening ].

3 Eye

4 Bolt

5 Plastic Rivets (Qty. 2)

6 Connector

7 Wire to Four-Way Lumbar Support Switch

Footwell Cover Retaining Strip, Loosening





- Disengage retaining strip - 1 - on footwell cover - 2 - from brackets - 4 - (Qty. 2) on side panel - 3 -.