Oil Pump: Locations
Oil pump, lower section of oil pan, component overview
1 - 10 Nm
2 - Oil pan (lower section)
^ With Oil Level Thermal Sensor G266
3 - 10 Nm
4 - Intake tube
^ With oil strainer
5 - Seal
^ Replace
6 - O-ring
^ Replace
7 - 10 Nm
8 - Oil pipe
9 - Seal
^ Replace
10 - 10 Nm
11 - Oil pipe
12 - O-rings
^ Replace
13 - Drive shaft for coolant pump
14 - Fitting sleeves
^ 2 pieces
15 - Seal
^ Replace
16 - Oil pump
^ Do not disassemble
^ With relief valve approximately 4 bar
17 - Drive shaft for oil pump
18 - 10 Nm
19 - Housing for intake tube
20 - O-ring
^ Replace
21 - Seal
^ Replace
22 - 10 Nm
23 - Seal
^ Replace
24 - Oil drain plug - 50 Nm
Oil Level Thermal Sensor G266, removing and installing
1. Bolt - 10 Nm - Insert using locking compound
2. Sealing ring; replace
3. Electrical harness connector
4. Oil Level Thermal Sensor G266