Automatic Headlamp Range Control

Automatic Headlamp Range Control

General Information

The automatic headlamp aim control system is installed on vehicles with High Intensity Gas Discharge (HID) headlamps.

The system contains the following components:

• Level control system sensors at front and rear axles

• Headlamp range control module

• Headlamp beam adjusting motors integrated with headlamp units

When driving, the system automatically adapts the headlamp beam inclination dependent on vehicle suspension movement and load. Headlamp glare to oncoming traffic is minimized.

=> [ Headlamp Range Control Module ]

Headlamp Range Control Module

Removing

• Location: at instrument panel carrier behind glove box

- Remove glove box.

- Disconnect electrical connection - arrow -.





- Remove screws - 1 - and - 2 - and remove module.

Installing

Install in reverse order of removal.

Tightening Specifications