HID Lamp Control Module

HID Lamp Control Module

CAUTION!
• HIGH VOLTAGE!

• Always disconnect negative ( - ) battery terminal prior to working on parts of HID headlamp components marked with yellow "HIGH VOLTAGE " warning symbols.

Removing

- Remove headlamp.

- Remove screws - arrows -.





- Remove control module - 1 - from headlamp housing.

- Disconnect adapter cable - 2 - for HID headlamp bulb at control module - 1 -.





Installing

Install in reverse order of removal, noting the following:

- Check gasket between control module for HID headlamp bulb and headlamp housing.

- Install headlamp.