Diagram 97/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Camshaft Position (CMP) Sensor, Camshaft Position (CMP) Sensor 2, Knock Sensor 3, Knock sensor 4





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G163 - Camshaft Position (CMP) Sensor 2 Locations

G198 - Knock Sensor 3 Locations

G199 - Knock sensor 4 Locations

J623 - Engine Control Module (ECM) Locations

T3b - 3-Pin Connector, blue, on engine block

T3g - 3-Pin Connector, black, on engine block

T121 - 121-Pin Connector, black

(104) - Ground Connection (in right front wiring harness) (Sensor Grounds))

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

Previous Diagram 97/8 (Tracks 85-98)

Next Diagram 97/10 (Tracks 113-126)