Tunnel Crossmember
Tunnel crossmember, removing and installing
Special tools, testers and auxiliary items required
^ Engine/transmission jack VAG 1383 A
^ Torque wrench VAG 1331
^ Torque wrench VAG 1332
Removing
- Remove sound insulation.
- Remove nuts with washers - arrows -.
- Support transmission using engine/transmission jack VAG 1383 A, using a suitable block of wood.
- Remove bolts - 1 - and - 2 -.
- Remove tunnel crossmember.
Installing
- Tighten combi bolt - 1 - to 115 Nm plus an additional 90° 1/4 turn.
Use new washer and new bolt.
- Tighten combi bolt - 2 - to 65 Nm.
- Tighten combi nuts - arrows - to 23 Nm.
- Install sound insulation.