Redetermining Shim S5 for Positioning Inner Race/Tapered Ball Bearing

Redetermining Shim S5 for Positioning Inner Race/Tapered Ball Bearing





This is necessary when replacing gear set.

Positioning of inner race/tapered ball bearing (on drive pinion) for location of hollow shaft in transmission is determined with this shim - A -.

The actual dimension "A1" - arrow - that you need for this shim "S5" is inscribed on gear set ring gear. In the example, dimension "A1" = 98.86 mm





Determine shim needed according to table.

The following shims are available:





- In the example, shim "S5" determined is 2.70 mm.