Work Procedures Legend

Work Procedures Legend

Sanding







- Wear away weld seam with a grinder around material application.

NOTE: The weld seams must be sanded so that the panel strength of the exterior panels is not or only slightly weakened.

Set an edge

- To perform an overlapping weld.

Perforate

- To perform a gas-shielded arc plug weld later.

Drill







- To perform a gas-shielded arc plug weld later or drill out spot welds (original connection).

Sanding







- Removing paint on hard-to-reach areas (e.g. interior roof frame) with brush VAS 5182

Cavity sealant







Adhesives

Fine seal