Diagram 60/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module, Door control modules, Automatic Day/Night Interior Mirror, Light Recognition Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G399 - Light Recognition Sensor

J386 - Driver's Door Control Module Convenience System Overview

J387 - Front Passenger's Door Control Module Convenience System Overview

J519 - Vehicle Electrical System Control Module

T10e - 10-Pin Connector, black, on driver's door control module

T10f - 10-Pin Connector, black, on front passenger's door control module

T17f - 17-Pin Connector, orange, connector station A-pillar, left

T20 - 20-Pin Connector, black, door A-pillar, left

T20a - 20-Pin Connector, black, door A-pillar, right

T23 - 23-Pin Connector, black, on vehicle Electrical System Control Module

W - Front Interior Light

Y7 - Automatic Day/Night Interior Mirror

(44) - Ground connection, on left A-pillar, lower part Component Locations Overview in Passenger Compartment

(347) - Ground Connection (in roof wiring harness)

(A87) - Connection (reverse lamp) (in instrument panel wiring harness)

(A187) - Automatic Day/Night Interior Mirror Connection 1 (in instrument panel wiring harness)

(A188) - Automatic Day/Night Interior Mirror Connection 1 (in instrument panel wiring harness)

* - with Automatic Day/Night Outside Mirror only

** - 4.0mm2 cross-section where applicable

Previous Diagram 60/5 (Tracks 43-56)