Function 08 - Read Measured Value Block

General Information

The new seat adjustment with memory generation features On Board Diagnostic (OBD) capability. The control module for seat adjustment with memory is equipped with a DTC Memory.

Malfunctions occurring in monitored components/wiring are stored in DTC memory together with an indication of the type of malfunction.

If any control elements are replaced they must be adapted and a basic setting must be initiated => [ Seat Control Element, Basic Setting ].

On Board Diagnostic (OBD), initiating program

Test requirements:

• Voltage supply and fuses for appropriate systems OK.

• Connecting scan tool (VAS5051) => [ VAS 5051, Connecting ] VAS 5051, Connecting

• Switch ignition on.

• If no display appears, use wiring diagram to check power supply for (VAS5051)

• Additional operating instructions can be called up by pressing the Scan Tool HELP button.

• The next step in the program sequence can be selected by pressing the -> button.

• Incorrect entries can be terminated by pressing the C button..

- Switch on printer by pressing Print button (indicator lamp in button lights up).

- Press button 1 for "Rapid data transfer".

Indicated on display:

Rapid data transfer HELP
Enter address word XX

Function 08 - Read Measured Value Block

• The function "Read Measuring Value Block" can be used to determine the current status of the system.

Performing function 08, Read measured value block

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 8.

Indicated on display:

Rapid data transfer Q
08 - Read Measuring Value Block

- Confirm entry with Q button.

Display:

Read Measuring Value Block
Enter display group number XXX

- Enter display group 001 and confirm entry with Q button.

The measuring value block selected will be displayed in standardized form. Evaluation => [ Measured Value Block, Overview ]