Backrest Heating Element

Backrest Heating Element

Removing





- Remove seat. Refer to => [ Seat ] Front RS Sport Seat.

- Remove the backrest. Refer to => [ Front Backrest and Seat Pan ] Front RS Sport Seat.

• Electrical wiring harness must not be loosened at seat pan.

• Set aside backrest toward rear on soft surface.

- Remove backrest cover and upholstery. Refer to => [ Backrest Cover and Cushion ].

- Cut out area - A - with electrical connection wire from old heating element.

- Remove old electrical connection wire.

- Disconnect electrical wire connections to heating elements at backrest bolsters at positions - B -.

- Disconnect electrical connection wires to upper backrest heating element at positions - C -.

Installing

- Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.

- Route connecting wires to backrest bolsters through openings in seat cushion without crossing.