Backrest Cover

Backrest Cover

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)









1 Right backrest cover

2 Left Backrest Cover

3 Retaining Clip

4 Bolt - 2.5 Nm

5 Belt Guide, Outer Part

• Removing and Installing, refer to => [ Outer Part Of Belt Guide, Removing And Installing ]

6 Belt Guide, Inner Part

• To remove, remove backrest cover, refer to => [ Backrest Cover and Cushion ] Covers and Cushion, RS Front Sport Seats

7 Backrest Frame

Backrest Cover, Removing and Installing





- Affix backrest panel all around trim - 1 - using adhesive tape - 2 -.

- Using pry lever (80-200), pry off upper backrest cover at inner side, starting from backrest panel.

- Disengage clip at front corner of backrest panel extremely carefully.

Outer Part Of Belt Guide, Removing And Installing





- Carefully guide pry lever (80-200) between backrest cover and outer part of belt guide.

- Carefully press to disengage outer part of belt guide from inner part of belt guide.