Backrest Cover

Front Seats

• From 06.2006, the usual wiring harness routing to connector station under front seat. Refer to => [ Connectors, Disconnecting ] Front Seats has been replaced with modular wiring routing => [ Modular Wiring Routing Assembly Overview, from June 2006 ] Front Seats.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular. Refer to => [ Modular Wiring Routing Versions ] Front Seats.

Backrest Cover





1 - Front seat

2 - Clips (Qty. 3)

3 - Retainers (Qty. 2)

4 - Backrest cover

• Removing

- Replace clips - 2 - (Qty. 3): Insert a flat screwdriver into clip and turn it clockwise until clip releases.

- Disengage backrest cover - 4 - upward from brackets - 3 - (Qty. 2).

• Installing

•

- Replace damaged clips - 2 - (Qty. 3).

- Install the backrest cover - 4 - in reverse order of removal.