Spring Mat With Seat Pan Wiring Harness
Spring Mat with Seat Pan Wiring Harness
1 - Cable Ties (Qty. 4)
2 - Spring Mat With Wiring Harness
• Removing
- Remove seat. Refer to => [ Seat ] Seat.
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Attach the front seat to the fixture for seat repair (VAS 6136).
- Remove side trim on sill side. Refer to => [ Side Trim, Sill Side ] Side Trim, Sill Side.
- Remove side trim on tunnel side. Refer to => [ Side Trim, Tunnel Side ] Side Trim, Tunnel Side.
- Remove the backrest. Refer to => [ Front Backrest ] Front Backrest.
- Remove cover and padding from seat pan. Refer to => [ Seat Pan Cover and Cushion, Standard Seat ] Front Seat Covers and Cushion, Power Memory Seats.
- Remove cable ties - 1 - (Qty. 4).
- Disengage spring mat - 2 - at - A - positions (Qty. 2).
- Disengage spring mat - 2 - at - B - positions (Qty. 4).
- Tip seat to side.
- Disconnect connectors - 3 - (Qty. 3).
- Remove screw - 5 -.
- Remove spring mat with wiring harness - 2 -.
• Installing
- To install, perform the steps used in removal in reverse order.
3 - Connector (Qty. 3)
4 - Washer
5 - Bolt