Headrest Guides With Insertion Lock, Removing and Installing
Headrest Guides With Insertion Lock, Removing And Installing
Removing
- Push release button - 2 - in - direction of arrow A - and pull headrest - 1 - upward as far as possible - arrow B -, keep release button pushed while doing so.
- Press release button - 2 - on headrest - 1 - until stop - arrow -.
- Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.
- Remove headrest completely from headrest guides.
NOTE: For clarity, headrest guide is depicted as removed.
- Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (it is located across from retaining clip for headrest guide).
- Disengage catch - 2 - of headrest guide - 1 - in - direction of arrow B -, press screwdriver - 3 - in - direction of arrow A - to do so.
- Remove headrest guide.
Installing
Installation is reverse of removal.