Seat Bench Cover and Upholstery, Removing and Installing

Seat Bench Cover And Upholstery, Removing And Installing







1 - Cover

- Removal:
- Remove rear seat bench: Vehicles through 10.04 vehicles from 11.04.
- Pry out plastic strips - 3 - using a screwdriver.
- Turn back cover - 1 -.
- Remove cover - 1 - upward and press in plastic clips - 4 - (24x) using a screwdriver.
- Pry out plastic strips - 5 -.

- Installing:
Installation is reverse of removal. Observe the following when doing so:
- Replaced damaged plastic clips.
2 - Upholstery
3 - Plastic strips (Qty. 24)
4 - Plastic clips (Qty. 24)
- Replace damaged plastic clips.
5 - Plastic strips