Center Armrest Rear Trim
Center Armrest Rear Trim
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
• Removing
- Remove the center armrest - 1 -. Refer to => [ Center Armrest ] Center Armrest.
- Place the center armrest so it is in the same position as when it is folded up in the vehicle. Slide the trim removal wedge ( 3409) back between the trim - 2 - and the section of the upholstery that faces down and unclip the trim.
• The trim - 2 - is slotted on one side.
- Remove the trim - 2 - from the side is that is NOT slotted.
• Installing
To install, perform the steps used in removal in reverse order.