Radio Systems Connector Assignments

CD Changer

• Unlisted connector terminals are not assigned.

Black 12-pin multi-pin harness connector





1 CD data out to Radio (R)/Navigation System with CD Drive Control Module (J401 )/Radio/Navigation Display Control Module (J503 )
2 CD CLK out to Radio (R)/Navigation System with CD Drive Control Module (J401 )/Radio/Navigation Display Control Module (J503 )
3 Ground from Radio (R)/terminal 31 (with RNS-E/radio generation II+)
4 CD data in from Radio (R )/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)
6 Permanent positive from Radio (R)/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)
7 Right signal to Radio (R )/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)
8 Positive switched from Radio (R)/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)
9 Signal ground from Radio ( R)/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)
10 Left signal to Radio (R )/Navigation System with CD Drive Control Module (J401)/Radio/Navigation Display Control Module (J503)