Diagram 105/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's and Front Passenger's Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

F138 - Airbag Spiral Spring/Return Spring With Slip Ring Airbag Component Location

J234 - Airbag Control Module

N95 - Driver's Airbag Igniter Airbag Component Location

N131 - Front Passenger's Airbag Igniter 1 Airbag Component Location

N132 - Front Passenger's Airbag Igniter 2 Airbag Component Location

N250 - Driver's Airbag Igniter 2 Airbag Component Location

S11 - Fuse (on fuse/relay panel)

T4e - 4-Pin Connector, yellow, connector station: module carrier in interior

T5c - 5-Pin Connector, yellow, near glove Compartment

(109) - Ground Connection (in airbag wiring harness)

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A139) - Connection 3 (15) (in instrument panel wiring harness)

- Short circuit bridge becomes effective when connector is unplugged

*** - Ground Connection from Airbag Control Module

Next Diagram 105/3 (Tracks 15-28)