HID Bi-Xenon Headlamps, From 11.04
HID Lamp Control Module
CAUTION!
• HIGH VOLTAGE!
• Always disconnect negative ( - ) battery terminal prior to working on parts of HID headlamp components marked with yellow "HIGH VOLTAGE " warning symbols.
Removing
- Remove headlamp.
- Remove screws - arrows -.
- Remove control module - 1 - from headlamp housing.
- Disconnect adapter cable - 2 - for HID headlamp bulb at control module - 1 -.
Installing
Install in reverse order of removal, noting the following:
- Check gasket between control module for HID headlamp bulb and headlamp housing.
- Install headlamp.