Door Safety and Entry Lamp

Interior Lamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Door Safety and Entry Lamp

• Door safety lamp or entry lamp must be removed to replace bulb.

• Bulb for door safety lamp: 12 V, 5 W

• Bulb for entry lamp: 12 V, 5 W

Removing

- Using a flat screwdriver, press in retaining tab - 1 - and pry out door safety lamp or entry lamp - 2 -.





- Unplug connector - 3 -.

- If present, carefully pry off cover on door safety lamp - arrow -.





- Remove bulb from socket on back side of door safety lamp or entry lamp.

Installing

Installation is reverse of removal, paying attention to the following:

- If present, install cover on door safety lamp.

- Plug in connector.

- Insert door safety lamp or entry lamp into opening and engage on opposite side.