Throttle Position Sensor: Service and Repair

Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing

Removing
- Remove driver side storage tray.







- Disconnect electrical connector - 2 -.
- Remove bolts - 1 - and - 3 -.
- Remove accelerator pedal module.

Installing
Installation is in reverse order of removal. Note the following:
- Install driver side storage tray.

Vehicles with automatic transmission:
- On vehicles with automatic transmission, the kick-down function must be adapted if the throttle position sensor or engine control module are replaced.

Torque specifications
Accelerator pedal module to pedal mount 10 Nm