Diagram 86/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply, Ignition/Starter Switch, Fuses, Starting Interlock Relay, Transmission Control Module (TCM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

B - Starter

D - Ignition/Starter Switch

G70 - Mass Air Flow (MAF) Sensor Locations

J207 - Starting Interlock Relay

J217 - Transmission Control Module (TCM)

J623 - Engine Control Module (ECM) Locations

S5 - Fuse (on fuse/relay panel)

S231 - Fuse (on fuse panel)

T1 - 1-Pin Connector, black, engine compartment, right

T1d - 1-Pin Connector, black, engine compartment, left

T4x - 4-Pin Connector, black, near battery

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

T17j - 17-Pin Connector, brown, connector station E-box, plenum chamber

T94 - 94-Pin Connector, black

(501) - Threaded connection -2- (30), on the relay plate

(A2) - Plus connection (15), in instrument panel wiring harness

(A32) - Plus connection (30), in instrument panel wiring harness

(A70) - Connector (15a, fuse 231), in instrument panel wiring harness

(D51) - Plus connection 1 (15), in engine compartment wiring harness

(D97) - Connection (50) (in engine compartment wiring harness), right

* - for engine code BKN only

** - for engine code BGB, BPG only

*** - for engine code BHF, BBK only

Next Diagram 86/3 (Tracks 15-28)