Diagram 105/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E25 - Front Passenger's Safety Belt Switch

G452 - Seat Occupied Recognition Pressure Sensor Passive Occupant Detection System

G453 - Seat Occupied Recognition Safety Belt Force Sensor Passive Occupant Detection System

J234 - Airbag Control Module

J706 - Seat Occupied Recognition Control Module Passive Occupant Detection System

T8c - 8-Pin Connector, black, seat wiring connector station, passenger seat

T17k - 17-Pin Connector, in passenger's Seat

(109) - Ground Connection (in airbag wiring harness)

(412) - Ground Connection 3 (in power seat wiring harness)

* - with Seat Occupied Recognition Pressure Sensor (Bladder mat) only

** - where applicable

Previous Diagram 105/6 (Tracks 57-70)

Next Diagram 105/8 (Tracks 85-98)