Lock Cylinder and Ignition Switch
Lock Cylinder and Ignition Switch
CAUTION!
Before beginning repairs on the electrical system:
• Obtain the anti-theft radio security code.
• Switch the ignition off.
• Disconnect the battery Ground (GND) strap.
• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.
• Steps after reconnecting voltage supply => Battery.
• Induction coil for anti-theft immobilizer is connected to lock cylinder and cannot be replaced individually.
• If the induction coil is faulty, the lock cylinder must be replaced.
• Observe induction coil specifications when replacing lock cylinders => [ Induction Coil, Replacing ] Immobilizer.
=> [ Ignition Switch Terminal Assignments ]
Ignition Switch Terminal Assignments
15 Terminal 15
30 Terminal 30
50 Terminal 50
50 b- Terminal 50b
75 Terminal 75
86 s- Terminal 86s
P - Park position