Ribbed Belt Pulley Without Freewheel, Removing and Installing

Ribbed Belt Pulley without Freewheel, Removing and Installing

Special tools, testers and auxiliary items required

• Socket (3310)

• 8 mm hex socket or TORX T50

Removing





- Remove generator.

- If present, press the protective cap off the generator pulley.

- Counterhold mounting nut using socket (3310) and rotate generator shaft clockwise to loosen it.

- Remove ribbed belt pulley.

Installing

Install in reverse order of removal, observing the following:

- Turn the generator shaft counterclockwise to tighten.

- Clip protective cap onto generator pulley.

Tightening torque