Voltage Regulator, Valeo Generator From MY 2001, Removing and Installing
Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
Removing
- Remove generator.
- Press out cover from threaded pins at rear side of generator - arrows -.
- Remove bolts - 1 - and combination bolt - 2 -.
- Remove voltage regulator.
Installing
- Press off protective cap - 2 - from voltage regulator - 1 - in - direction of arrow -.
- When positioning voltage regulator, ensure carbon brushes rest correctly on slides.
- Attach protective cap with voltage regulator installed.
Further installation is in reverse order of removal.
• Tightening torque => [ Valeo Generator, from MY 2001, Assembly Overview ].