Rear With Automatic Leveling Control

Self leveling sensor for vehicles with automatic headlight range control

Note:
^ General information

^ The vehicle level sensor is only available as a replacement part complete with coupling rod and upper and lower retaining plates. The subframe must be removed in order to replace the complete vehicle level sensor.





1 - Combi bolt
^ Always replace
^ Tighten to 85 Nm plus an additional 90° 1/4 turn

2 - Left Rear Level Control System Sensor G76 or Right Rear Level Control System Sensor G77
^ Assembly complete with attachments
^ Lever - arrow - must face center of vehicle.
^ After replacing, perform basic headlight setting.

3 - Collared bolt, 10 Nm

4 - Trapezoidal link