Windows and Glass: Service Precautions

Minimum Curing Times

CAUTION!
• For safety reasons, use only electrically non-conductive 2C-adhesive when installing windshield and rear window using the materials listed below.

• Vehicle is only safe for operation after minimum curing time has elapsed and only then may it be used.





Cleaning when soiled by adhesive sealing material

Adhesive removal solution D 002 000 10 is the recommended cleaning solution. Observe safety precautions when processing.

CAUTION!
When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint surfaces:

- First, clean paint surfaces with a dry cloth. Remove further material using adhesive removal solution D 002 000 10.

Plastic trim:

- Allow adhesive sealing material to harden (about 1 hour) and then peel off.