Rear Window Wiper Motor

Rear Window Wiper Motor

Removing

- Remove wiper arm => [ Rear Window Wiper Arm ] Rear Window Wiper Arm.

- Remove lower rear lid trim.

- Disconnect electrical connection - 2 -.





- Disconnect washer fluid hose - 1 - from connecting pipe for spray jet.

- Loosen nuts - arrows - and detach wiper motor.

Installing

Install in reverse order of removal, noting the following:

- Carefully insert rubber grommet into hole in rear window.

• Fluid hose must audibly engage in spray jet connection.

- Switch on ignition.

- Actuate rear wiper and allow wiper motor to move to end position.

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Install lower rear lid trim.

- Adjust wiper arm => [ Rear Window Wiper Arm Park Position, Adjusting ] Rear Window Wiper Arm Park Position, Adjusting.