Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2008 >> A4 Sedan (8EC) V6-3.2L (BKH) >> Repair and Diagnosis >> Transmission and Drivetrain >> Continuously Variable Transmission/Transaxle >> Service and Repair >> Overhaul >> 01J, Continuously Variable Transmission (CVT) >> Gears, Controls >> Hydraulic Control Module, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Hydraulic Control Module, Removing and Installing



Hydraulic control module, removing and installing - 01J, Continuously Variable Transmission (CVT)

Note:
^ Rules of cleanliness for working on automatic transmissions.
^ General repair notes.
^ Always replace hydraulic control assembly if it has collected dirt or if it is defective.

- Remove end cove.

CAUTION!
The hydraulic control assembly must not under any circumstances be supported on the long pump shaft on the back side or raised up. Otherwise, the blades inside the vane pump will be crushed and the pump damaged.
pro multis · About Operation CHARM