Front Final Drive Assembly Overview
Front Final Drive Assembly Overview
• Automatic Transmission Clean Working Conditions, refer to => [ Clean Working Conditions ] Clean Working Conditions.
• General Repair Instructions, refer to => [ Repair Information ] 09EA Transmission.
1 Left Flange Shaft Seal
• Between the final drive and the transmission housing
• Removing and Installing, refer to => [ Left Flange Shaft Seal ] Left Flange Shaft Seal
2 Adjusting Shim
• Behind the taper roller bearing outer race
3 Taper Roller Bearing Outer Race
4 O-Ring
• Replace together with the plug.
5 Drain Plug
• 35 Nm
• Removing and installing
6 Right Flange Shaft
• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft
7 Locking Ring
• Removing and installing
8 Right Flange Shaft Seal
• Removing and Installing, refer to => [ Right Flange Shaft Seal ] Right Flange Shaft Seal
9 Bolt
• 23 Nm
• Follow the tightening sequence. Refer to => [ Front Final Drive Cover O-ring ] Service and Repair.
10 Front Final Drive Cover
11 Adjusting Shim
• Behind the taper roller bearing outer race
12 Taper Roller Bearing Outer Race
13 O-ring
• On the front final drive cover
• Removing and Installing, refer to => [ Front Final Drive Cover O-ring ] Service and Repair
14 Differential
15 Spring Pin
16 Selector Shaft Lever
17 Selector Shaft Seal
• Removing and Installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal
18 Bolt
• 23 Nm
19 Left Flange Shaft
• Removing and installing, refer to => [ Left Flange Shaft ] Left Flange Shaft