Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing
Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing
Removing
- With ignition switched off, disconnect battery Ground (ND) wire => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.
- Remove glove compartment.
- Release retaining springs - arrows - and press fuse panels - 1 - and - 2 - toward rear out of base mount.
- Remove bolts - 1 - and - 2 -.
- Remove base mount in - direction of arrow - from central tube for instrument panel.
Installing
Install in reverse order of removal, observing the following:
- Install glove compartment.
- Connect battery. Required actions => [ Vehicles with : ] Battery, Disconnecting and Connecting.
Tightening Specifications