Fuel Pressure Sensor: Service and Repair

Fuel Pressure Sensor (G247)

Removing

- Remove the upper section of the intake manifold. => [ Intake Manifold, Upper Section ] Intake Manifold, Upper Section.

- Disconnect the electronic connector from the fuel pressure sensor (G247) - 4 -.






- Remove the fuel pressure sensor - 4 -.

Installing

Installation is performed in reverse order.

• Tightening specification, refer to => [ Intake Manifold, Lower Section, with Fuel Rail Overview ] Intake Manifold, Lower Section, With Fuel Rail Overview

- Install the upper section of the intake manifold, refer to => [ Intake Manifold, Upper Section ] Intake Manifold, Upper Section.