Shift Interlock Control Module: Service and Repair

Selector Lever Sensor System Control Module

Removing

- Remove selector lever handle => [ Selector Lever Handle ] Selector Lever Handle.

- Remove the front ashtray.





- Disconnect electrical connector - 1 -.





- Release the 4 retaining tabs - arrows - and remove the Selector Lever Sensor System Control Module (J587).

• Disregard the - A arrow -.

Installing

Install in reverse order, paying attention to the following:

- Let the Selector Lever Sensor System Control Module (J587) engage with the 4 retaining tabs - arrows -.

- Secure Selector Lever Transmission Range (TR) Position Display (Y26) electrical wiring - arrows -.

- Install the front ashtray.

- Install selector lever handle. Refer to => [ Selector Lever Handle ] Selector Lever Handle.