Front Seat Backrest Adjustment Motors V45/V46 Assembly Overview

Front Seat Backrest Adjustment Motors V45/V46 Assembly Overview

• For clarity reasons, the backrest is shown without lumbar support, padding and cover.

• A Coupe backrest frame is shown in the illustration. The Roadster backrest frame is the same, only the entry assistance release cable shown in the illustration is not installed.






1 Backrest adjustment motor

• Driver side (V45)

• Passenger side (V46)

• May not be replaced. Refer to => [ Driver's Backrest Adjustment Motor V45 or V46 ] Driver's Backrest Adjustment Motor V45 or V46

• If there is damage to the motor, replace backrest frame with backrest adjustment motor, shaft and housing. Refer to => [ Driver's Backrest Adjustment Motor V45 or V46 ] Driver's Backrest Adjustment Motor V45 or V46

2 Front backrest

• Only backrests shown

3 Rivet

• Do not remove

4 Housing with stop switch coupling

• Driver Backrest Stop Switch (E69) or front passenger backrest stop switch (E70) are installed in the housing

• do not remove the housing from the shaft => [ (Item 5) Shaft ] or the component will be damaged

• The driver backrest stop switch (E69) or front passenger backrest stop switch (E70) may not be replaced. Refer to => [ Front Seat Backrest Stop Switches E69 and E70 ] Front Seat Backrest Stop Switches E69 and E70

5 Shaft

• Do not remove