Roof Antenna (R52)

Roof Antenna (R52)

• The radio, telephone, navigation system antenna (R52) (GSM/GPS/RC/SAT), has maximum of four connectors.

• The antenna wires are placed on the left and right C-pillars.

• To remove the radio, telephone, navigation system antenna, remove the C-pillar trim and the headliner.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove left and right C-pillar trim.

- Remove the headliner completely and lay it on the instrument panel.

- Release and disconnect the connectors - 1 -, - 2 - and - 3 - from the antenna wires.






- Remove the antenna wires up to the Radio, Telephone, Navigation System Antenna - arrows -.

- Remove nut - 4 -.

- Remove Radio, Telephone, Navigation System Antenna - 5 - upward from roof.

Installing

- Guide in antenna wires the opening in the roof and carefully attach Radio, Telephone, Navigation System Antenna on the roof.

- Make sure the seal fits correctly.

- Perform further installation in reverse order.

Tightening specifications, refer to => [ Antenna System Overview ] Antenna System Overview.