Lane Change Assistance Warning Lamp In Exterior Mirrors, Through 05.09

Lane Change Assistance Warning Lamp in Exterior Mirrors, through 05.09

Removing





- Remove the exterior mirror.

• To protect the paint in the area around the mirror housing, tape it off with a soft cloth.

- Remove the screws - 4 - and - 5 -.

- Release the retaining tabs - 3 - in the - direction of arrow A -.

- Release the retaining clip - 1 - and remove the exterior rearview mirror housing - 2 - from the cover - B arrows -.

- Press the mirror adjusting unit down and pull the exterior rearview mirror housing - 1 - upward slightly.





- Disconnect the connector - 2 - on the front of the mirror adjustment unit bracket - 3 -.

- Pull the exterior mirror housing upward and disconnect the electrical connector - 3 -.





• Ignore items - 1, 2 and 4 - and the - arrow -.

- Release the retaining tabs - A arrows - and press the lane change assist warning lamp - 1 - out of the exterior rearview mirror housing - 2 - - arrow B -.





Installing

Install in reverse order of removal, observing the following:

• If an LED is faulty, the entire lane change assistance warning lamp in the exterior rearview mirror must be replaced.

- Install the exterior rearview mirror housing.