Sill Panel
Sill Panel
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
Removing
- Remove the rear panel trim panel sideways - 1 - from the body in the transition area to the sill panel strip - 3 -. Refer to => [ Side Rear Panel Trim Panel ] Side Rear Panel Trim Panel.
- Unclip sill panel strip - 3 - with Trim Removal Wedge (3409).
Installation
Install in reverse order of removal. Note the following:
• If trim clamps remain in body mounting points, remove these and insert them in trim.
• Check clamps for damage or deformation, replace if necessary.
• The lower A-pillar trim - 4 - must be installed.
- Stretch door seal lip - 2 - over sill panel strip - 3 - and over the rear panel trim panel - 1 -.