Sill Side Retaining Bracket Trim

Sill Side Retaining Bracket Trim

Removing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Service Precautions.

- Remove tunnel side trim panel:

• Manual front seat, refer to => [ Sill Side Trim ] Sill Side Trim

• Power front seat, refer to => [ Sill Side Trim ] Sill Side Trim.

- Remove the bolt - 4 -.






- Remove bolts - 3 - (quantity: 2).

- Remove the bracket - 2 - from the front seat - 1 -.

Installation

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Sill Side Trim Retaining Bracket Assembly Overview ] Sill Side Trim Retaining Bracket Assembly Overview