Backrest Cover, Separating From Upholstery
Backrest Cover, Separating from Upholstery
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
Removing
- Unclip cover retaining strip - 1 - from clips - 3 - in upholstery foam - 2 -.
- Use Trim Removal Wedge (3409) to unclip.
- Remove the cover - 1 - from cushion - 2 -.
Installation
Install in reverse order of removal. Note the following:
- Align cover - 4 - to upholstery - 1 -.
- Begin clipping cover - 4 - to upholstery - 1 - in upper area - arrow -.
- To clip, press retaining strip - 3 - into clip - 2 -.
- Make sure the clip - 2 - and the retainer strip - 3 - are attached correctly.